Warwick Bar — Swelled Oak Turned Furniture Legs, Set of 4

Three soft swells down the whole length, falling to a slim foot.

Three soft swells run the length of the leg — ∅64, ∅56 then ∅46 — easing into a ∅22 foot. The rhythm is spread over the whole leg rather than concentrated in a band, so it reads as a slow wave rather than ornament. A ∅48 mounting land and ∅52 collar give it a hard shadow line where it meets the underside of the top.

Turned between centres from a single stick. No glue-up, and no glue line crossing a swell. Best in clear or fumed oak, where the swells catch the grain — this is the one pattern in the range that would look wrong ebonised.

Made to order in Birmingham

Turned by hand on the lathe at 9 Milk Street, one leg at a time, from solid hardwood. A set of four is turned in one batch off a single story stick so the legs agree with each other. Grain and figure vary from leg to leg — that is the material, not a fault.

Lead time 2–3 weeks.

Sizes and fitting

Lengths are listed above; other lengths within the range can be turned to order. These are console, coffee, bench and side‑table legs. Our lathe takes 700 mm between centres, so we cannot turn a dining‑height leg (711–737 mm) in this pattern — please ask before ordering if you need dining height.

Supplied unfinished-ready or oiled on request. Hanger bolts and T‑nuts can be fitted — tell us the top thickness.